A Device Simulating Cold Nuclear Fusion, Based on the Theory of New Axioms and Laws

Summary

According to Law2, the Sun is generated by a longitudinal decelerating Funnel from up toward in Gravity center (in 3D) and emits an accelerating transverse vortex with an inside-out direction (in 2D) (Figure 1c). There are many details and subtleties in this transformation.
A. For example, because the longitudinal Funnel is decelerating, it rotates to right in Time. (viewed against the motion). Thus, this decelerating Funnel (in 3D) creates decelerating transverse layers (in 2D). These layers delay each other more and more or they displace decelerated each other in increasing distance. Thus, they form in inverse direction (to left) an accelerating transverse wave (in plane 2D) in core named Back wave. Therefore, the decelerating transverse rotates to the right in the core but generates an accelerating vortex that rotates to left. It forms a reverse Back wave (Figure 1f).
B. It is logical that the longitudinal vortex and the longitudinal Funnel are invisible to light. The reason is that the light waves are not reflected by the threads of the longitudinal vortices and an outside observer cannot perceive them. The reason is that the light waves propagate as transverse vortices and when they cross the thread of the longitudinal vortex, they form diffraction by bypassing it and continuing their journey with the same speed and direction [3,4,5]. Therefore, the accelerating Funnel (in output from the Sun) as well as the input decelerating Funnel (in input to Earth) are invisible to an outer observer.
C. According to Law6 (system6) the structure of the accelerating longitudinal Funnel is the following: In center of Funnel moves longitudinal vortex with maximum linear velocity, zero angular velocity and minimum number of turns. An adjacent vortex (on the outside) rotates with less linear velocity, more angular velocity and with more number turns. In periphery rotates vortex with minimal linear velocity, maximal angular velocity and maximum number turns. It turns out that in center the vortex is a maximum accelerating, but every outer adjacent vortex becomes slower and slower (Figure 1c) [ 5,6]. Therefore, the accelerating vortex passes through the plasma (3-4) without friction (Figure 2b). The reason is that it sucks to itself (inward) the free vortices. The act of sucking cools the core [2,3]. Thus, in center of the Sun passes perpendicular accelerating longitudinal vortex and it cools the core.

Result: Through the core of Sun passes the longitudinal Funnel (in 3D), perpendicular to transverse vortex (in 2D) and the most accelerating vortex has inserted in center of Funnel which cools the core of Sun.

A. According to Law 6, during acceleration, free transverse vortices are sucked in and thus the vortex accelerates more and more (Figure 1c). The driving force comes from the initial speed of the main transverse vortex, and the free vortices sticking together turn the initial velocity into positive acceleration. The initial velocity of the transverse vortex (in plane 2D) is generated by the last spiral of the decelerating longitudinal Funnel (in volume3D) because the outermost spiral has maximum angular velocity (Figure 1f) [ 2,3].
B. According to Law5 the last wheel of decelerating longitudinal vortex moves with a zero linear velocity and a maximum angular velocity as the last wheel of longitudinal vortex has a maximum radius (Figure 1c) [ 4,5]. According to Law 6, the transverse accelerating vortex in the center has a small linear velocity, and to periphery becomes maximum (Figure 1f) [ 6].

Result: The generating vortex starts from center to periphery and the periphery of Sun rotates much faster than the core.

Towards the periphery, the linear velocity increases every point by (ψⁿ) times (ψ is constant Golden proportion equals to 1,62) [2,3,4]. And finally, the rotation speed reaches very large values. Each resonator inside the Sun spins inside itself a precisely defined transverse vortex with a precisely defined LF frequency and speed. Finally. It takes off accelerated and centrifugally from each resonator almost perpendicularly from it (Figure 1e). The direction of this Funnel is precisely defined to one planet. The velocity of this exit Funnel is maximum equal to light speed and the energy is lowerfrequency, heavier and denser [9,12].

Result: In LF accelerating -decelerating Funnel shooting from Sun to Earth and the HF accelerating impulses shooting from Sun to environment the linear velocity is commensurate to light speed.

Each resonator inside the Sun generates light beams as HF impulses. Finally, they takes off accelerated from all resonators in Sun almost perpendicularly from it to environment in all directions (Figure 1g) [12].The longitudinal acceleration beams, which reaches enormous speed and energy, does not emit heat [9].Even vice versa - sucking matter and energy from the surrounding space, the accelerating beams from Sun cools its space around .They cool the medium through which it passes including space between Sun and Earth (Law6) [2,3].

Result: Because the HF beams from Sun are accelerated and reach maximum linear velocity and kinetic energy, they do not emit heat to the environment.

According to Law 5, the source of heat is only the decelerating vortices [2,3]. But in the Sun, there are no decelerating vortices. Actually, in the Sun there are only accelerating transverse vortices [14]. Therefore, there is no reason why the internal generation of the Sun causes the radiating heat. The only way the Sun emits heat is through nuclear fusion, which actually emits a large amount of heat. Therefore, the heat is released only from the exothermic nuclear reaction between two deuteriums (2H) resulting in helium (He).

Result: In Sun heat is released only from the exothermic nuclear reaction between two deuteriums (²H) resulting in helium (He). The reason for heat is the nuclear reaction between two deuteriums (2H) resulting in helium (He). Heat is also released from the numerous transverse decelerating loops and decelerating protuberances.

Result: The reason for nuclear reaction is positive acceleration of HF accelerating impulses emitted by Sun. Thus, it sucks and sticks the deuterium atoms(²H) and produces helium (He). The phenomenon of emitted accelerating Funnel and accelerating beams from the Sun has not yet been fully studied and explained.

Concept: If we can simulate generation of an accelerating vortex (Law6) with sufficiently high acceleration and if we pass it through a medium saturated with deuterium (2H) we will synthesize helium (He) with the release of great energy.

The reason is that many of the atoms of the deuterium are attracted to the accelerating longitudinal vortex with a force proportional to the acceleration. They are dragged and stuck together as part of them fuse and form helium. The synthesis process itself releases energy. The process is carried out at normal temperature and does not need additional heating, but the process only needs significant acceleration. This accelerating HF impulses even cool the medium (Law 6) (Figure 2b) [3,4,5,6].

The problem is in generating an accelerating vortex. In practice we can generate a longitudinal accelerating vortex imitating the result of Law 1 on base of new Theory.

How an accelerating vortex is generated according to the new Axioms and Laws is shown in a previous works by the same author [10,11,12]. According Law1 a decelerating vortex (in 2D) from outward to inward generates an accelerating vortex (in 3D) in Gravity center, which perpendicular to the plane (2D) of decelerating vortex. The reason is decelerating vortex from out to inward (in 2D), but result is accelerating vortex from center to upward (in 3D). By the way this accelerating vortex plays role of generator of Antigravity Force (Law1) (Figure1a, d).

This Device has to contain 3 parts: Generator of accelerating Funnel (Law1), Synthesis Chamber (Law6) and Heat Chamber figure 3.

Description of Figures:

i. Figure 3a shows how an accelerating longitudinal vortex is generated. According to the Theory of the new Axioms and Laws, this is the same way that Anti-gravity force is produced. The main object is a snail with nozzles mounted on the inside at a decreasing distance (multiplied by 1/ψⁿ) and with increasing diameter (multiplied by ψⁿ). Their calculation in every step (n) is in based on parameter (ψ) equals to Golden proportion. A Golden proportion (ψ) fulfills the requirement: ψ-1/ ψ =1. The dimensions are calculated and shown in previous works by the same author [4,5,6].

At the snail’s entrance is fed rotating to the right (in the direction of movement) vortex. It must have a quarter period of rotation calculated to be equal to a quarter of the period of rotation inside the snail. The initial phase must start from 0 degrees (0⁰), and it moves up to 90 degrees (90⁰)- that’s why it is. quarter period. Due to friction inside the snail, the vortex begins to lag behind and move with negative acceleration. According to Law 5, during decelerating motion the decelerating primary vortices are emitted at every (n_i) points with a decreasing distance (1/ψⁿ) between them. At the same time, they emit at every (n_i) point an increasing speed (V₀. ψⁿ) and an increasing amplitude (W₀. ψn), where V₀ and W₀ is starting velocity and amplitude.

Therefore, these decelerating vortices gather at the point called Gravity Center (p.G). It is displaced from the Geometric Center (p.O), and it carries out the phenomena of full resonance: resonance in place, time and amplitude. At this point the primary transverse amplitudes are superimposed on each other according to the z-coordinate (in order in generating along z-axis). According to Law1, each transverse decelerating vortex wound in a plane (in 2D) and generates an accelerating longitudinal vortex, perpendicular (in 3D) to this plane. Thus, these primary decelerating transverse vortices generate primary accelerating longitudinal vortices. The primary accelerating longitudinal vortices as perpendicular vectors are multiplied (not sum as primary decelerating transverse vortices). The primary accelerating longitudinal vortices are multiplied among themselves in the order of the generated by z-axis. As a result, an accelerating Funnel of accelerating vortices inserted into each other is obtained. The arrangement in the accelerating Funnel is such that the fastest vortex (with maximum longitudinal speed, maximum angular speed and minimum number and radius of loops) is inserted in the center. After it the slower one is wound on the outside. And finally, the slowest vortex (with minimum longitudinal speed, minimum angular speed and maximum number and of loops) is wound on the periphery.

ii. Figure 3b describes the absorption Chamber called Synthesis Chamber. This Chamber must be full of atoms of the hydrogen isotope deuterium (2H). According to Law 6, the accelerating vortex sucks in the primary accelerating vortices towards itself, accelerating the main motion more and more. The primary accelerating vortices suck and stick the atoms of deuterium that are around. Naturally, due to the maximum positive acceleration, the central longitudinal vortex from the accelerator Funnel will suck in the most deuterium atoms to itself. Due to the minimum positive acceleration the peripheral longitudinal vortex will suck in the fewest deuterium atoms. In order for fusion to take place, a precisely defined high threshold of positive acceleration is necessary. Therefore, perhaps only the central vortices in the accelerating Funnel will succeed in reaching this threshold. They can suck in deuterium (2H) atoms at a sufficient speed and synthesize helium (He). It is necessary to suck and absorb 2 atoms of deuterium(²H) to obtain 1 atom helium (He).
iii. Figure 3c shows the Heat Chamber. It contains the result of the synthesis. The reason for synthesis is that some (not all) of the absorbed atoms of deuterium in the previous Synthesis Chamber synthesize in this Heat Chamber a new atom with a new internal structure, named helium (He). It is well known that helium has two electrons and two protons mainly. In the process of helium fusion, the structure changes and sizes decrease. When the electron is in a more outer orbit, it has the shape of an inflated sphere with a large radius of the transverse section and a very short perpendicular vector. But when the electron enters a more inner orbit, it acquires the shape of a spindle with a small radius in the transverse section and a long perpendicular vector. This action is equal to the jump of electron from outer orbit to inner orbit which is accompanied by emission of heat. The atom decreases its radius and emits the excess potential energy in the form of heat.

Result: The shape of the electron shrinks from a toroid shape with a larger cross-sectional radius and very short perpendicular vector to a spindle shape with a smaller cross-sectional radius and very long perpendicular vector.

The electron jumps from the outer position of the electron shell to an inner position. In the outer position the electron has the shape of a bulging toroid with a short perpendicular vector which is a typical form of a particle. In the inner position the electron has the shape of a contracted toroid with long perpendicular vector which is a form of a wave.

Result: The essence of the electron transforms from a particle to a wave.

The atom is contracted both - of electrons in electron shell and of the protons in core.

Result: The shape of the proton shrinks from a sphere shape with a larger cross-sectional radius and very short perpendicular vector to a spindle shape with a smaller cross-sectional radius and very long perpendicular vector.

In fact, the reason for the compaction of the helium atom (He) is the contraction and deformation of the two protons in its nucleus. The proton jumps from the outer layer of the nucleus to an inner layer. In the outer layer proton has shape as a bulging sphere with short perpendicular vector which is typical form of a particle. In the inner layer proton has shape as a contracted spindle with long perpendicular vector which is a form of a wave.

Result: The essence of the proton transforms from a particle to a wave.

When the proton spindle shrinks, the radius of the proton is reduced. This causes the jumping of the proton from an outer to an inner layer, Thus the shrunken proton attracts its corresponding electron, which is under its personal management [6,7]. This act causes it to pull its corresponding electron from an outer orbit to an inner orbit.

Result: The protons in its nucleus pull their respective electrons inwards towards themselves (because they sharply reduce their radii)

Synthesis of helium is done through densification of its structure. The reason is that the distances between the electrons and core decrease by transformation of the shape of the electrons. When the electron is in a more outer orbit, it has the shape of an inflated sphere with a large radius of the transverse section and a very short perpendicular vector. But when the electron enters a more inner orbit, it acquires the shape of a spindle with a small radius in the transverse section and a long perpendicular vector. This means that the distance between core and electron shell decreases.

Result: The distances between the electrons and nucleus is reduced (because of the decrease of the size of the electrons and protons).

In act of contraction, the decelerating transverse vortices (that is coiled inside electrons) suddenly contract the coiled vortex towards the Gravity center. At the same time, they shoot a longitudinal vortex perpendicular to the central section (Law1) [6,7].

Result: In electron the decelerating transverse vortices in toroid suddenly contract towards the Gravity center and the longitudinal vortices are shot upward.

In this transformation, the excess transverse vortices (excess potential energy) are radiated as heat, and longitudinal vortices are also radiated in type of light.

Result: In proton the accelerating transverse vortices in the sphere suddenly contract towards the Gravity center and the longitudinal vortices are shot.

We already know that the transverse vortices are equal to potential energy and longitudinal vortices are equal to kinetic energy [4,5].

Result: In electrons and protons, the excess transverse vortices are equal to excess potential energy is radiated as heat and excess longitudinal vortices is equal to excess kinetic energy is radiated as light.

However, the described synthesis could not be carried out if a sufficiently large positive acceleration was not reached and if the deuterium in the chamber was in a small concentration.

A necessary condition for nuclear fusion is the presence of a necessary positive acceleration in the longitudinal vortex. A sufficient condition is that the chamber is filled with a sufficiently large amount of deuterium, which will be sucked in and glued by this positive acceleration.

A. For the fusion reaction to take place, the two fusing nuclei must come so close to each other (at a distance of ~ 10-15 m) that the nuclear forces between the nucleons begin to act. This convergence is opposed by the forces of electrostatic repulsion between the positively charged nuclei. To overcome these forces, an external source of energy is needed.
B. The easiest way to do this is to heat up the atoms, which has the side effect of removing the electrons from their orbits. As a result, “bare” cores remain. In most experiments, the nuclei and electrons are in a form known as plasma. The temperature required to provide enough energy to overcome the repulsion between the nuclei is a function of the total charge.
C. In the present article, to overcome the electrostatic flashback forces, a sufficiently large positive acceleration is opposed. The Electrostatic forces are based on the uniform motion of the vector E in a closed circle (according to Classical Axiom of Maxwell for the Electromagnetic field). But the positive acceleration sharply deforms this closed circle as it becomes an open circle. Thus, the closed circles turn into an open vortex (Axiom1). The positive accelerating vortex sucks in from outward to itself (Law6). Disrupting the structure of the closed circle, its center moves from the Geometric point (p.O) to its Gravitational point (p.G). For each vortex, the center of Gravity moves to a different place or a different distance.
D. This means that each vortex is open in a different way - one in more vector of distance from geometric center (FO_max), another in less vector of distance from center (FO_min). This means that one coiled vortex can be tucked into another more open vortex and form a package.

Because of the Force of Sucking the Force of Electrostatic repulsion are broken. Consequently, breaking the structure of the closed vortices leads to the breaking of the forces of repulsion.

None.

No conflict of interest.