Mini Review
Method for Reducing Energy Consumption in Cotton Ginning
MM Agzamov1*, Sh Sh Khakimov2, Kh M Nosirov3, Z N Agzamova4 and A S Khamidov5
2Professor of the department “Technological machines and equipment”, Tashkent institute of textile and light industry, Uzbekistan
3Researcher of the department “Technological machines and equipment”, Tashkent institute of textile and light industry, Uzbekistan
4Researcher, designer of UZ-KOR Technopark, Uzbekistan
5Lecturer of the department “Labor protection and ecology”, Tashkent institute of textile and light industry, Uzbekistan
Corresponding AuthorMM Agzamov, docent of the department “Technological machines and equipment”, Tashkent institute of textile and light industry, Uzbekistan.
Received Date: November 21, 2022; Published Date:December 09, 2022
Abstract
The article presents the results of research on finding ways to reduce energy costs in the process of saw ginning. There is information on the development of an installation for determining the coefficient of friction of raw cotton on a steel surface and the values of the speed of movement of raw cotton determined by experimental studies at various temperatures of the steel surface.
-
MM Agzamov*, Sh Sh Khakimov, Kh M Nosirov, Z N Agzamova and A S Khamidov. Method for Reducing Energy Consumption in Cotton Ginning. Annal Biostat & Biomed Appli. 5(1): 2022. ABBA.MS.ID.000601.
-
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.